How to Add Your NSC-DB2 Video Doorbell to Blue Iris

This guide will walk you step-by-step through adding your NSC-DB2 video doorbell to Blue Iris. Click here to see how to add your NSC-DB2 to an H-Series NVR, or click here to see how to add it to an R-Series NVR.

Ensure Your Doorbell's Firmware is Up to Date

In order to add your doorbell to Blue Iris, your doorbell must be upgraded to the most recent firmware build. To upgrade your firmware, click here to read our guide, "How to Upgrade Your NSC-DB2 Video Doorbell's Firmware."

Find Your Doorbell's IP Address

If you upgraded your doorbell's firmware, you needed the IP address in order to add the device to the Batch Configuration tool. If you didn't need to upgrade your firmware, click here to read our guide, "How do I Find the IP Address of my NSC-DB2 Video Doorbell?"

Launch Blue Iris and Click the "+" Icon to Add a Camera

blue-iris-add-camera.png

Input Your Doorbell's Information

blue-iris-wizard-1.png

Create a full name and a short name for your doorbell camera. Select the "Network IP" type option. Be sure the "Enable audio" option is selected if you want to be able to hear audio from the doorbell's speakers. Then click "OK."

blue-iris-wizard-2.png

1 IP Address: The IPv4 address you found with the Batch Configuration tool.
2 User: admin
3 Password: Your doorbell's verification code*
4 Make: Generic/ONVIF
5 Model: RTSP H.264/H.265/MJPG/MPEG4

*Your doorbell's verification code can be found on the back of your doorbell or on your Quick Start Guide.

Click "OK" one more time.

Congrats! You now have access to your NSC-DB2 video doorbell directly from Blue Iris!

Was this article helpful?
13 out of 14 found this helpful