EZCloud Displaying Offline

When setting up Remote Viewing, You may get a Success Message after scanning the QR code. However, the NVR can show as Offline on the EZView App afterwards.

On the NVR web Interface, you may get this Message:
2020-04-17_1302.png

**Network disconnected. Please check network settings such as DNS server address and port mapping. **

Here are a few tips to fix this issue:

- Make sure that the recorder is networked locally correctly.
      - Wired Directly from the LAN port of the NVR to your router or network switch.

- Place the recorder on DHCP
2020-04-17_1308.png

      - After Enabling DHCP, click on Save.

Once all of these steps have been taken, the Status should come Online:
2020-04-17_1320.png

Was this article helpful?
0 out of 4 found this helpful