How to Create a New User

Adding Users is great for if you have multiple people that need to use or view the NVR, they can have their own unique logins aside from the admin account.

In this guide, we will go over both the 3.0 & 4.0 Attached monitor Interface, as well as the Web Interface.

Web Interface

When you are logged into the local web interface, go into Configuration -> System -> User Management

Then click Add.

A popup menu will appear and you can then type in the username, and password for the new account, then set the permissions you'd like the user to have.

Creating_a_new_user.gif

Level: Set the user level to Operator or Guest. Different user levels have different operating permission.

  • Operator: The Operator user level has permission of Two-way Audio in Remote
    Configuration and all operating permission in Camera Configuration.
  • Guest: The Guest user has no permission of Two-way Audio in Remote Configuration and
    only has the local/remote playback in the Camera Configuration.
  • User’s MAC Address: The MAC address of the remote PC which logs onto the NVR. If it is
    configured and enabled, it only allows the remote user with this MAC address to access the NVR.

Local Configuration

  • Local Log Search: Searching and viewing logs and system information of NVR.
  • Local Parameters Settings: Configuring parameters, restoring factory default parameters and
    importing/exporting configuration files.
  • Local Camera Management: The adding, deleting and editing of IP cameras.
  • Local Advanced Operation: Operating HDD management (initializing HDD, setting HDD
    property), upgrading system firmware, clearing I/O alarm output.
  • Local Shutdown Reboot: Shutting down or rebooting the NVR.

Remote Configuration

  • Remote Log Search: Remotely viewing logs that are saved on the NVR.
  • Remote Parameters Settings: Remotely configuring parameters, restoring factory default
    parameters and importing/exporting configuration files.
  • Remote Camera Management: Remote adding, deleting and editing of the IP cameras.
  • Remote Serial Port Control: Configuring settings for RS-232 and RS-485 ports.
  • Remote Video Output Control: Sending remote button control signal.
  • Two-Way Audio: Realizing two-way radio between the remote client and the NVR.
  • Remote Alarm Control: Remotely arming (notify alarm and exception message to the remote
    client) and controlling the alarm output.
  • Remote Advanced Operation: Remotely operating HDD management (initializing HDD, setting
    HDD property), upgrading system firmware, clearing I/O alarm output.
  • Remote Shutdown/Reboot: Remotely shutting down or rebooting the NVR.

Camera Configuration

  • Remote Live View: Remotely viewing live video of the selected camera (s).
  • Local Manual Operation: Locally starting/stopping manual recording and alarm output of the
    selected camera (s).
  • Remote Manual Operation: Remotely starting/stopping manual recording and alarm output of the
    selected camera (s).
  • Local Playback: Locally playing back recorded files of the selected camera (s).
  • Remote Playback: Remotely playing back recorded files of the selected camera (s).
  • Local PTZ Control: Locally controlling PTZ movement of the selected camera (s).
  • Remote PTZ Control: Remotely controlling PTZ movement of the selected camera (s).
  • Local Video Export: Locally exporting recorded files of the selected camera (s).

 

Attached Monitor Interface

3.0 Interface

From the Live View, right click and select Menu

2020-04-01_1638.png

Go into the Configuration Section

2020-04-01_1640.png

Then select User on the left side and click Add at the bottom right to add a New User

2020-04-01_1641.png

Enter the information for new user, including User Name, Password, Level and User’s MAC Address.

Click the OK button to save the settings and go back to the User Management interface. The added new
user will be displayed on the list

2020-04-01_1642.png

2020-04-01_1646.png

You Can Click on the Green Check Mark under the Permissions Column to adjust the permissions for the User.

4.0 Interface

From the Live View of the NVR, click on the top left Home Icon. Then select the System Tab.

2020-04-06_1557.png

Select the User Tab on the Left. Then Click +Add

2020-04-06_1559.png

A Popup section will appear for you to put in the User Name, Password, Level and User’s MAC Address. for the new user.

Afterwards, click OK. Then the new user will appear.

2020-04-06_1603.png

You can click on the Green Check Mark to adjust the users permissions.

Was this article helpful?
0 out of 0 found this helpful