How To Disable The IR On An H-Series Camera

Some situations must require that no IR light must be present. Disabling the IR can be very useful!

Step 1. Log Into Cam's Web Interface

If the camera is plugged into the back of an H-series NVR, please follow this guide for virtual host to access the cam directly -> How to Setup Virtual Host

This can only be done by a local PC

Step 2. Disabling IR

Go into the Configuration Tab -> System -> Maintenance -> System Service

Uncheck Enable IR Light and click Save

2020-04-01_1537.png

Was this article helpful?
0 out of 1 found this helpful